Description
JOHNSTONE’S TRADE – WOODWORKS QUICK DRY POLYURETHANE FLOOR VARNISH – CLEAR SATIN 2.5L
Johnstone’s Quick Dry Polyurethane Floor Varnish has been specially formulated for use on all interior timber floors. It provides a hardwearing durable finish that enhances the natural beauty of the wood. This special formulation is suitable for application over previously varnished or stained surfaces.
PREPARATION
Ensure all surfaces to be varnished are sound, clean, dry and free from dust, grease, polish or any other surface contaminant. Remove any flaking or cracked varnish. Sound, existing varnish should be rubbed down with fine waterproof abrasive paper, rinsed thoroughly and allowed to dry. Do not prepare the surface using steel wool. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead.
APPLICATION
Stir Johnstone’s Quick Dry Polyurethane Floor Varnish thoroughly before use. Apply two or more coats of the varnish evenly, by good quality brush along the wood grain as required, paying particular attention to the end grain. Do not overlap the brush strokes. On bare or new wood the first coat can be thinned with up to 10% clean water and followed by two coats of undiluted varnish. Sand down lightly between coats. Do not apply when temperatures are below 10°C. This product is not suitable for application over ferrous metal.
COVERAGE
Johnstone’s Quick Dry Polyurethane Floor Varnish will cover approximately 18 square metres per litre depending on the nature and porosity of the timber.
DRYING TIME
Touch dry in 1 hour. Recoatable after 2-4 hours. Heavy foot traffic can be allowed after 16-24 hours under normal conditions.
AFTER USE
Remove as much product as possible from brushes before cleaning. Clean equipment immediately after use with warm soapy water and rinse thoroughly. Replace lid firmly. Some local authorities have special facilities for the disposal of waste coatings. Do not empty into drains or watercourses.
GENERAL INFORMATION
To avoid the risk of spillage, always store and transport in a secure upright position. PROTECT FROM FROST.
Reviews
There are no reviews yet.